The AquaFill “Mini” electronic water level control float is ½ the size of the Original AquaFill. This unit is easier to hide and is perfect for small fountains and water features such as container gardens, fountain pots, fountain bowls and small fiberglas or moulded patio waterfalls.
The AquaFill, unlike the mechanical “toilet tank type” floats is “Fail-safe” and be used with confidence by koi pond owners, koi breeders and koi farms worldwide. The “Mini” AquaFill is the most versatile float switch on the market today. The switch can be converted from a normally open switch to a normally closed switch simply by reversing the float on the shaft.
The AquaFill can be installed anywhere, since it is a switch which works in conjuction with a 24 volt transformer and solenoid valve, all of which are connected with low voltage wire. Therefore the location of the water and power source is not an issue in installation. Water can be routed seperately to the water feature. The power source can be 200-500 feet from the water feature since it only requires a 24 volts power source, which can be supplied by low voltage wire such as used in landscape lighting. A mechanical float, requires the float to be in the same location as the water source, greatly limiting the flexability of the installation. Unlike the AquaFill float, which can be installed at one end of a pond with the solenoid valve and water supply at the opposite end. In addition to its versatility, reliability and cost saving features, The AquaFill carries a 5 year warrenty.
