AquaFill/ Pool Water Level controller
The pool AquaFill is an electronic water level controller that utilizes a float to automatically sense the water level in a pool or pond and automatically add water as needed. This will eliminate the need to add water to your pool or pond manually. The AquaFill water level sensor/controller/float operates on a 24 volt supply, in conjunction with a 24 volt water solenoid valve, both of which are included with the AquaFill auto-fill (autofill) system.
Model AFPS-02
Model AFPD-02 (Deluxe)
is designed to retrofit to any pool skimmer, providing automatic water level control of swimming pool water.PLUS: Low water Detection In the event the water source was interrupted, and the water level drops below the AquaFill sensor, a second sensor detects the low water condition and interrupts the pool pumps power source before the water level can reach the pool skimmer, preventing the pump from sucking air, losing its prime, running dry, over heating , causing permanent damage.
Model AFPS-01
The Kit includes everything needed to install the Model AFPS-01 or the AFPDS-01 such
as the skimmer support mount, wire nuts, spade connectors, splice connectors, heat shrink
tubing and even the epoxy for sealing the wire exit cap.
Because 24volts is not allowed in or around a swimming pool, the AquaFill is supplied with only six volts which operates a 6 volt relay that then supplies 24 volts through its dry contacts to supply a solenoid switch. The two transformers and relay are contained in a control box.
click to enlarge
click to enlarge
. 
There is an optional model that will automatically disconnect the pump if the pool level drops below the skimmer.
